Avery MONARCH 939I Uživatelský manuál

©2004 Avery Dennison Corp. All rights reserved. 28028 28028 0 0 TC0939IOI Rev. AJ 1/10Operating Instructions® Monarch ™939i Intelligent Keyboard

Connecting the 939I in Terminal Mode to a 9855/9860 PrinterWhen using the keyboard in terminal mode (no script) with a 9855 or 9860printer, the keyboa

Connecting the Scanner’s CablesA scanner is optional for the keyboard. You need to connect the cable tothe scanner and keyboard before you can use it

Using the KeyboardThe keyboard has full alphabetic keys with 10 numeric keys, 5 functionkeys, 4 arrow keys, and several special keys.Control KeysP, F

E Escape. Returns the display to the previous menu or clears anerror.C Clear. Clears the entire field.P Pause. Interrupts printing. Press Pause ag

1-10 Getting Started

SETTING BATCH OPTIONS 2This chapter only applies when using the keyboard in terminalmode. When using the keyboard in intelligent mode, your scriptcon

Setting Prompts and DefaultsUse the following steps to customize which prompts appear during batchentry and to specify defaults for these prompts.1. P

7. Decide if you want to see this prompt in Batch Entry mode and presseither l or r to display your selection. Press N.Cut OptionNo r8. Decide if

12. Decide if you want to change the default (No) and press either l or rto display your selection. If you select “Yes,” the last tag in the batch i

17. Decide if you want to see this prompt in Batch Entry mode and presseither l or r to display your selection. Press N.. Quantity1 _ _ _ _ _ _ _

Each product and program carries a respective written warranty, the only warrantyon which the customer can rely. Avery Dennison Corp. reserves the ri

3. Decide if you want to see this prompt in Batch Entry mode and presseither l or r to display your selection. Press N.Quantity1 _ _ _ _ _ _ _ _ 4

Print Multiple Number of copies of each tag to print as a set within abatch. A print multiple of one prints one set of one tag. A print multiple of t

2-8 Setting Batch Options

ENTERING BATCH DATA 3This chapter only applies when using the keyboard in terminalmode. When using the keyboard in intelligent mode, your scriptcontr

When a field has fixed characters, they appear as part of the data entryprompt. The fixed data stays the same, and prints on every tag that usesthe f

5. Depending on your settings in Batch Options, you may seeClear Fields? No r¨Press N (No) to keep the old data. Each field appears withthe previo

You may seeNumber of parts?[1/5]: _11. Type the number of times the data prints across the tag width. Press N. Cut OptionNo r¨If your printer has a

If you do not specify a cut mode (cut last ticket, cut after batch, or no cut before), the knife cuts after each tag. This is the same ascut mode 1.

15. If you do not want to cut before the first tag in a batch, press R todisplay “Yes” and press N. The knife does not cut before the first tagin a b

Printing Tags Without CuttingDepending on your settings in Batch Options, some of theseprompts may or may not appear. See Chapter 2, “Setting BatchOp

TABLE OF CONTENTSGETTING STARTED ...1-1Overview...1

Using Print Multiple with Inc/Dec FieldsIf your tag has an incrementing or decrementing field, the print multiple isthe number of tags printed as a se

Entering Batch Data 3-9Three-part tag(number of parts = 3)Cut here for a cut multiple of 1(Cut after one tag) OR Print multiple = 1 (Prints one tag

3-10 Entering Batch Data

TROUBLESHOOTING 4This chapter provides solutions to keyboard problems and explains common status code messages you may receive when using thekeyboard.

4-2 Troubleshooting

SPECIFICATIONS &ACCESSORIESAHeight: 4.0 inches (102 mm)Width: 8.25 inches (210 mm)Depth: 8.75 inches (222 mm)Weight: 2.33 lbs. (1.06 kg)Shipping W

Flat Surface MountMake sure all surfaces you apply the dual lock fasteners to are free from dirt and oil. If necessary, clean with isopropyl alcohol.

Wall Mount1. Hold the bottom of the stand against the wall (hinge side up). Mark the mounting holes with a pencil.2. Screw the stand onto the wall (sc

A-4 Specifications & Accessories

CHARACTER SETS BThis appendix contains a listing of the symbol sets and code pages the printer supports.Supported Symbol Sets and Code PagesThe CG Tri

CHARACTER SETS...B-1Supported Symbol Sets and Code Pages ...B-1Internal (Sta

Internal (Standard and Reduced Font)B-2 Character Sets

BoldCharacter Sets B-3

ANSIB-4 Character Sets

Code Page 437Character Sets B-5

Code Page 850B-6 Character Sets

CONFIGURING THE SYSTEM CThis chapter contains information useful for your SystemAdministrator:¨Accessing the Keyboard’s Main Menu.¨Operating in Script

About the ScannerA scanner is optional for the keyboard. For more information about thescanner or other peripheral devices, refer to their User Manua

Troubleshooting the ScannerIf the bar code does not scan:¨Change the scanner’s angle slightly and try again.¨Move the scanner four to eight inches awa

Configuring the ScannerThe scanner may already be configured to work with your ADK script. If not, use these bar codes to configure the scanner:¨Rese

Set the Communications Port DefaultsTo set the communications port to the same defaults as thekeyboard, scan the following series of bar codes, one at

GETTING STARTED 1The Monarch® 939iä keyboard allows you to easily configure theprinter and enter batch data. The keyboard works with theMonarch® 9416

You can also set the communication values by using the Keyboard’s MainMenu. The keyboard defaults are 9600 Baud, 8-bit Word Length, 2 StopBits, No Pa

Set the Minimum Bar Code WidthTo scan single-digit bar codes, scan the following series of barcodes, one at a time, from top to bottom.Configuring the

C-8 Configuring the System

28028 28028 0 0 Avery Dennison Printer Systems Division170 Monarch LaneMiamisburg, OH 453421-800-543-6650 (In the U.S.A.)1-800-387-4740 (In Canada)w

Throughout this manual, you see references to the term “script.” The scriptis the program that runs on the keyboard to perform a specific task, such a

About ScriptsThis manual does not cover any specific information about what may be inyour script, because each script is different. Your script is wr

Connecting the Cables to a 9416 XL PrinterWhen using the keyboard with the 9416 or 9416 XL printer, the keyboardreceives power from the auxiliary powe

Connecting the 939I with a Script to a 9800â PrinterWhen using the keyboard with a script and a 9825, 9855, or 9860 printer,the keyboard receives powe