Avery MONARCH 7411 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Tiskárny Avery MONARCH 7411. Avery MONARCH 7411 User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Monarch, MonarchNet2, 7411 are trademarks of Avery Dennison Retail Information Services LLC. Avery
Dennison is a trademark of Avery Dennison Corp.
Microsoft, Windows, and NT are trademarks of Microsoft Corporation.
Novell and NetWare are trademarks of Novell, Inc.
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.
Other products are trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
TC9906MN2SG Rev. AA 8/10 Avery Dennison Corp. All rights reserved.
ETHERNET SETUP GUIDE
The Monarch 7411 wireless Ethernet Print Server lets you communicate
with a Monarch 9906 printer on a 10baseT or 100baseTX wired Ethernet
network or on an 802.11b or 802.11g wireless network. The print server
operates in Ad-Hoc (peer-to-peer) mode or infrastructure (access point)
wireless mode. You can also remotely manage and download print batches,
formats, printer configurations, and fonts. Refer to the MonarchNet2™
Operating Instructions found on our Web site (www.monarch.com
).
The print server supports multiple network protocols for users with
Telnet/FTP, Microsoft Windows 98, 2000, NT, XP, and Vista™, TCP/IP
(including LPR/LPD, Bootp, DHCP, and HP JetDirect), Novell NetWare
and SNMP. All protocols are simultaneously active.
Note: When turning on the printer or after sending a ^PR (printer reset)
immediate command, wait at least 30 seconds before sending data
to the print server. Any data sent to the print server before the 30-
second interval may be lost.
Information in this document supersedes information in previous versions.
Check our Web site for the latest documentation and release information.
Configuring the Print Server
1. Start your Web browser.
2. Type in your printer’s IP address (for example, 192.0.0.192) on your
computer. If you are not sure of your printer’s IP address, print a
configuration label. See, “Printing a Configuration Label,” for more
information.
The printer’s display shows the network symbol (wired) or the
antenna symbol (wireless) when the printer is connected and ready
to receive data.
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1 - ETHERNET SETUP GUIDE

Monarch, MonarchNet2, 7411 are trademarks of Avery Dennison Retail Information Services LLC. Avery Dennison is a trademark of Avery Dennison Corp.

Strany 2 - Print Server Status

2 Print Server Status When the print server is turned on, it goes through power-up diagnostics for a few seconds. The Ethernet card located on the bac

Strany 3 - MonarchNet 2 Network Status

3 Printing a Configuration Label To print a configuration label, press the Test/Reset button on the back of the Ethernet print server unit. The test p

Komentáře k této Příručce

Žádné komentáře