Avery 9860 Provozní pokyny stáhnout pdf (Strana 98)

The password is case-sensitive. Depending on your printer’s

firmware version, you may not be prompted for a user name.

Once here, you have verified operation to the print server.

7. Ping the printer.

Pinging the printer tells you if it is "seen" on the network. If you

cannot ping the printer, turn the printer off and then on. Then ping

every device in the path to the printer – access points, routers, etc.

Any device you cannot ping needs attention.

ping ip address (i.e. ping 192.0.0.192)

8. Verify connection to the data port by starting a Telnet session to the

printer using Port 9100 (i.e. telnet aa.bb.cc.dd 9100).

Press Ctrl-E on your keyboard. This sends an ENQ request.

The printer responds with three characters. Depending upon the

Telnet being used, you may not see the first character, as it is a

hex 05 value. The other two characters are ASCII characters.

You will see

which means the printer is online and waiting. Alternatively, you

can type

{J,2}

Note: The J must be capital.

The printer responds with {J,0,0,””,””}.

No response means that the printer may have an open session to

some other connection. Either terminate the other connection or

turn off the printer and turn it back on.

6-6 MonarchNet2 Operating Instructions

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 113 114

Žádné komentáře

Avery 9860 Provozní pokyny Strana 98